Wall Sticker Application Instructions

Check the Delivered Product

On a flat surface, unfold the ordered sticker, check if the print is correct, if all elements are cut out properly along the outline, and if there are no manufacturing defects. If something is not right, please report it to us, and we will send you a new copy.

 

Surface Preparation

Ensure that the wall is clean, dry, and smooth. Clean it from dust and dirt using a damp cloth and leave it to dry.

*If the wall is painted with latex, ceramic, or Teflon paint, it’s necessary to matte the wall, which will improve the adhesion of the sticker’s glue. Of course, after matting the wall, clean the area where the sticker will be applied. If you’re worried that the adhesion might still not be sufficient, you can use a primer in the area where the sticker will be applied, or if you notice over time that the sticker is peeling off, you can re-adhere it with glue.

 

Planning the Placement

Before removing the protective paper, hold the sticker against the wall to decide exactly where you want to place it. You can use masking tape to temporarily attach the sticker. Mark a gentle guideline with a pencil.

Sticker Application

Carefully remove a part of the protective paper from the back of the sticker, about 10 cm, rolling it under. Try not to touch the glue underneath. Start by attaching the sticker from the top, gradually pressing it against the wall and smoothing it out with your hand or a soft cloth to avoid air bubbles.

Adjustment and Correction

If the sticker is not perfectly straight or something goes wrong, you can gently peel it off and reapply it. Don’t worry! The material allows for this.

Final touches

After thoroughly applying the sticker, smooth it out again to ensure it adheres well to the wall and there are no air bubbles.

 

The sticker is of high quality, printed on durable material, but handle it gently. Do not force anything to avoid tearing thin elements. Every material has its limits of durability.